Thermostatic radiator valve makes a clicking sound during operation

1. The thermostatic radiator valve displays the content and can adjust the temperature up and down. The blue box does not vibrate. Preliminary analysis is that the wires connecting the thermostat and the blue box are in poor contact or come off. Check the pipes and fittings one by one; the rust on the blue frame is so severe that it prevents the motor from working.

2. The thermostatic radiator valve does not display content: the live and neutral wires connected to the thermostatic radiator valve have not fallen off; the socket part of the open space has not fallen; open the thermostat and check whether the rear wiring makes the thermostat black ( The equipment is all real estate developers looking for construction teams to install, the construction workers are contractors, according to the charges, the installation is relatively rough, in the case of using sheathed wires, the wool cannot be tightened), causing the wires to be exposed and easy to cause short circuits).

3. The temperature adjustment of the thermostatic radiator valve is abnormal:

If you want to raise the temperature, the indoor temperature is lower, and you want to lower the temperature. The higher the indoor temperature. This is the opposite of the brown and blue lines inside the blue box, just adjust both lines.

The thermostatic radiator valve will make a "click" sound during operation: abnormal current can cause the internal electronic components of the thermostatic radiator valve to be damaged to varying degrees. Under normal conditions, it can be used normally without affecting normal heating.